Home About Us HVAC Industrial Automation RoMark Division What's New Contact Us Newsletter Survey
 
 YOU ARE HERE: HVAC / Gas Heating Products / Cozy Furnaces

Louisville Tin and Stove




Direct Vent Furnace

CDV25/CDV33 CDV15

The Cozy Direct Vent Furnace is the perfect choice for today's zone heating needs. It mounts easily on any outside wall and occupies a minimum of space. The sealed combustion chamber draws air for combustion from out of doors and exhausts the products of combustion to the outside keeping room air fresh as springtime. The telescoping vent assembly containing air inlet tube, vent tube, and cap is included eliminating the need for expensive and difficult to install vent pipe systems. A wall mounted thermostat is standard or an optional built-in bulb stat kit (BBSK) is available. Both provide exact temperature control even if the power fails. All controls include 100% safety pilot and pressure regulator for safe, efficient operation.

Contemporary styling in attractive neutral bone finish blends with any decor. The louvered cabinet design maximizes airflow to provide even temperatures from floor to ceiling. Optional automatic blower provides even better circulation. (fits all units). 81 CFM.

430 Stainless Steel Burner

CozyÕs burner design assures quiet ignition, extinction and provides excellent flame characteristics for both natural and propane gas. Burner and control are easily removed for cleaning and service.

 

Cozy Direct Vents feature factory installed controls that include an energy efficient low-Btu, 100% safety-pilot, a built-in pressure regulator for either Natural or Propane Gas and convenient, matchless manual park igniter. Cozy's control system generates its own power and, therefore requires no electricity to operate, assuring heat even during a power failure! Cozy Direct Vents are offered with convenient wall thermostat or optional built-in bulb stat (BBSK) with control knob on unit top. Continuous seam-welded combustion chamber of cold roll steel maximizes heat transfer and bears a 10-year, non-prorated warranty.

Vent Cap Assembly

 

CozyÕs simple vent system is provided with each unit and minimizes installation expense by eliminating costly ductwork. Durably constructed of stainless and galvanized steel, the vent assembly is rainproof, prevents back-drafts, provides fresh air for unit combustion (large tube) and exhausts combustion products outside (small tube) the home. The vent cap includes a safety screen to prevent entry by small animals. The standard telescoping vent fits walls 5' to 9' thick. Optional vent extension kits are available - 15' (all models) and 24' (CDV15 & CDV25 only).


Thermostatically Controlled Blower

 

(DVB-2)
installs in minutes inside the cabinet and is prewired to simplify installation. Requires 115 VAC. 81 CFM

Optional Built-In Bulb Stat Kit

Manual Spark Assembly

 

Convenient push button pilot flame lighter eliminates need for matches or other lighting tools.

Installation Template is packed in each carton to allow convenient location of screw holes, vent opening and gas inlet.

Specifications

 

Model No.
Nat. Gas
CDV155 CDV255 CDV335
Model No.
LP Gas
CDV156 CDV256 CDV336
Input/Btu/hr. 15,000 25,000 33,000
Control M. Volt
Wall Stat
M. Volt
Wall Stat
M. Volt
Wall Stat
Dimensions
Height
Width
Depth
29 3/4" H
18" W
9 3/4" D
31 1/2" H
34 1/2" W
9 3/4" D
31 1/2" H
34 1/2" W
9 3/4" D
Gas Inlet Size 1/2" 1/2" 1/2"
Vent Size 9"* 9"* 9"*
Center of horizontal vent to floor 22" 24 3/4" 24 3/4"
Optional Equipment VK1525/9"-15"
VK1525/15"-24"
Fan DVB-2**
BBSK
VK1525/9"-15"
VK1525/15"-24"
Fan DVB-2**
BBSK
VK33/9"-15"
N/A
Fan DVB-2**
BBSK
Approx. Ship Wt. 65 lbs. 99 lbs. 99 lbs.

Includes 1/2" Floor Clearance Includes 4" Floor Clearance *Wall Opening **Weight 4lbs


Hi-Efficient Direct Vent Furnace

The New COZY HIGH EFFICIENT DIRECT VENT(80% + AFUE) is a perfect heating solution for single family residential, rental, summer/winter cabin, below grade and electric baseboard replacement applications. It mounts easily on any outside wall or, if vent/exhaust extensions are used, more centrally into the space to be heated. The sealed combustion chamber draws air for combustion from out of doors and exhausts the products of combustion to the outside. The 24 volt, draft induced unit, includes a standard vent kit that can be cut to fit wall thickness from 5 Ò - 32' and includes the external vent cap, This eliminates expensive venting and unnecessary labor expense.
THROUGH THE WALL APPLICATION

Features Include:

 

  • 24 Volt System (115 volt required)
  • Transistorized controls (Self-Diagnosing)
  • Tubular, aluminized combustion chambers warranted for 10 years - no pro rata
  • In-shot burners
  • Vent/exhaust extension kits available for below grade snorkel applications (Right/left or vertical takeoff)
  • Neutral Bone high-temp baked enamel casing paint
  • Top operated finger tip controls
  • Small silhouette vent cap standard
  • Automatic, draft induction blower system
  • Only requires 3-1/2 Ò outside wall opening
  • Counterflow, warm-floor blower action (500 CFM)

 

Tubular Aluminized Heat Exchanger

enhances efficiencies and carries a 10 year warranty with no pro rata

Below-Grade "Snorkel" Application


HEVK-5 5Õ Vent Exhaust Kit

Includes one (1) 6Õ Black Flex Intake Pipe, (1) 5Õ Flocked Exhaust Tube, (2) 3" Couplings, (3) Support Brackets, (3) 2" Hose Clamps. (NOTE: 15Õ maximum with three [3] vent exhaust kits.)

 

HEVE-5 Vent Enclosure Kit


Includes one (1) 5Õ Enclosure Body, (1) End Cap, (1) 24' Section Flexible Trim Strip.

 

Standard Vent Kit

can be cut to fit 5' to 32' wall thickness. Diameter of wall opening is only 3-1/2'

 

Other Optional Accessories


HEEL-1 90¡ Elbow Kit -

Contains one (1) 90¡, 2 inch aluminized, silicon wrapped steel elbow. (NOTE: May not use more than three [3] on any unit installation-one [1] comes with unit.)

HECK-1 Condensate Kit-

Contains one (1) 1/4 inch stainless steel tube-type p-trap with 6' plastic drain tube.

 


Installation Template

is packed in each carton to allow convenient location of screw holes, vent opening, and gas inlet.

 

Specifications

 

Model
Number
Input BTU/hr. Width Depth Height Gas Connection Type Gas Maximum Wall Thickness Minimum Wall Thickness
HEDV403 40,000 34-1/2" 9" 30" 1/2" Nat. 32" 5"
HEDV404 40,000 34-1/2" 9" 30" 1/2" L.P. 32" 5"

Direct Vent Counterflow Wall Furnace

4 MODELS TO CHOOSE FROM
40,000 to 62,500 Btu

COZY Direct Vent Counterflow Wall Furnaces incorporate three preferred concepts in heating - fan forced efficiency, counterflow heat delivery and sealed-combustion/direct-venting. Cooler air is drawn into the top of the unit, heated and delivered at floor level where it is needed most. Sealed-combustion means the unit draws combustion air from outside and exhausts combustion products to the outside, making safety a paramount consideration and allowing installation in sleeping quarters. Direct venting eliminates expensive ductwork and simplifies installation. COZY Direct Vent Counterflows mount on any outside wall and are perfect for multi-story, room addition, garage apartment and vacation housing applications. Fabricated from textured steel, attractively finished in Neutral Bone baked enamel paint. Cozy wall furnaces will grace any decor.

COZY VALUE FEATURES

  • Wall Thermostat - is standard on all units assuring convenient operation
  • Thermostatically Controlled Blower - draws cooler air into unit top and distributes heat at floor level
  • Standing Pilot (Low Btu) or Intermittent Ignition Device available as standard equipment, featuring 100% safety shutoff.
  • Manual Spark Igniter - (Standing Pilot units only) eliminates the need for matches or lighting tools.
  • Multi-Port Stainless Steel Burner - provides excellent flame characteristics and quiet ignition and extinction.
  • Aluminized, Continuous Seam-Welded Combustion Chamber - maximizes heat transfer, resists burnout and is warranted for 10 years (no prorata).
  • Recessible - up to 10' to occupy minimum room space.
  • Optional Side Outlet Kits - are available to disperse air to unit sides or adjacent rooms.
  • Standard Vent Assembly - accommodates wall thickness from 3/4' (recessed) to 12' (packaged separately).
  • Optional Cabinet Trim Kit - available to trim out recess installation

Performance Proven Features

Junction Box #1
provided inside upper casing to facilitate installation.

Powerful Thermostatically Controlled Fan #2
moves cold air into top of unit casing and distributes heated air through lower grill. Easily removable for servicing.

Heavy Duty Continuous Seam-Welded Aluminized Combustion Chamber #3
maximizes heat transfer and prevents rustout. Warranted for 10 years (no pro rata).

Safety Limit #4
interrupts burn cycle if air is restricted.

Standing pilot (Low Btu) or Intermittent Ignition Device #5
options available featuring 100% safety pilot and pressure regulator for natural or L.P. gas (24 volt).

Multi-Port Stainless Steel Burner #6
provides excellent flame characteristics with quiet ignition and extinction.

Vent Cap Assembly

COZYÕs vent system simplifies installation and eliminates costly ductwork. Constructed of galvanized and stainless steel, it is rust, rain and varmit proof. Combustion air enters large tube and combustion products are exhausted through small tube. Standard vent kit assembly (34245 - packaged separately) fits wall thickness from 3/4'-12'.

Manual Spark Assembly

Convenient push button pilot flame lighter eliminates need for matches or other lighting tools (standing Pilot units only).

Specifications

 

Model
Number
Type
Control
Type
Gas
BTU/HR.
Input

Finished
Dimensions
Amps Blower
Speed
CFM Approx.
Shipping
Weight
DVCF403 24 Volt Nat. 40,000 14 5/16" W x 78 5/8" H x 11 3/4" D 1.95 1 320 128 lbs.
DVCF404 24 Volt LP 40,000 14 5/16" W x 78 5/8" H x 11 3/4" D 1.95 1 320 128 lbs.
DVCF653 24 Volt Nat. 62,500 14 5/16" W x 87 5/16" H x 11 3/4" D 3.05 2 440 142 lbs.
DVCF654 24 Volt LP 62,500 14 5/16" W x 87 5/16" H x 11 3/4" D 3.05 2 440 142 lbs.
Models With Intermittent Ignition
DVCF407 24 Volt Nat. 40,000
14 5/16" W x 78 5/8" H x 11 3/4" D 2.20 1 320 130 lbs.
DVCF408 24 Volt LP 40,000 14 5/16" W x 78 5/8" H x 11 3/4" D 2.25 1 320 130 lbs.
DVCF557 24 Volt Nat. 55,000 14 5/16" W x 87 5/16" H x 11 3/4" D 3.30 2 440 144 lbs.
DVCF558 24 Volt LP 55,000 14 5/16" W x 87 5/16" H x 11 3/4" D 3.35 2 440 144 lbs.

NOTE: Vent wall opening size is 9 1/4" on all models. Gas inlet is 1/2" on all models.

Sizing Vented Gas Heaters


COZY comfort . . . . . . with our Warmest Regards!

 

SELECTION PROCESS:


Step 1: Measure Room:Length_______ x Width_______ x Ceiling Height_______ =_______Cubic Ft.Step
2: Determine Insulation Factor (1), (2), or (3). (See below)
Step 3: Select Temperature Zone from map below.
Step 4: Multiply:
Temperature Zone/Insulation Factor Digit ___ x Total Cubic Ft. _______ = _______ Btu Input Required

 

INSULATION FACTORS:


1) Insulation in ceiling and walls with storm doors and windows.
2) Insulation in ceiling, none in walls, with weather stripping.
3) Little or no insulation in ceilings or walls, unusual exposure, large glass areas.

 

Temperature Zones -40¡F -30¡F -20¡F -10¡F 0¡F 10¡F 20¡F 30¡F
Maximum Insulation Factor (1) 11 10 9 8 7 6 5 4
Average Insulation Factor (2) 18 16 14 12 10 1/2 9 7 1/2 6
Poor Insulation Factor (3) 24 21 19 17 15 13 11 9

THE ABOVE GUIDELINES ARE FOR VENTED PRODUCTS ONLY
(NOT FOR VENT-FREE UNITS).TEMPERATURE ZONES

 


Temperature Zones

 


Gravity Wall Furnace

6 MODELS TO CHOOSE FROM ... 25,000 TO 50,000 BTU

Click Here to request more information

COZY Gravity Wall Furnaces mount on any inside or outside wall (single wall model only) with 16' center stud space and provide both circulatedand radiated heat - a preferred combination! Available in either single wall or dual wall models, they provide economy and flexibility of operation and allow individual temperature control in Òhard-to-heat' areas. COZY is a perfect answer for either new construction or remodeling heating applications.

COZY VALUE FEATURES

 

  • Neutral Bone Baked Enamel Finish - resists fading and cleans easily with a damp cloth.
  • Resettable Blocked Flue Safety Device - automatically shuts the unit off in the event of flue blockage or incorrect vent installation.
  • ÒUnibody' Grill Construction - of heavy gauge steel eliminates heat warpage
  • Self Energizing Controls - provide their own power, eliminating heat loss even during power a failure.
  • Cast-Iron, Slotted-Port Burners - provide quiet ignition and extinction and excellent flame characteristics for Natural and L.P. gas
  • Low BTU Pilot - is durably constructed of stainless steel and provides maximum efficiency during standby.
  • Continuous Seam Welded Combustion Chamber - constructed of heavy gauge steel, maximizes heat transfer and is warranted for ten (10) years
  • Optional Thermostatically Controlled Fan - is available for single and dual (uses two) wall furnaces to enhance air circulation and eliminate air stratification.
  • Wall Thermostat or Built-in Bulb Stat - Control options available
Single Wall Furnace models may be equipped with a Rear Register Kit and Grille (40542) allowing warm air to circulate into the adjoining room. Adjustable vent controls air flow.

Continuous Seam-Welded Combustion Chamber constucted of heavy gauge aluminized steel, maximizes heat transfer. Warranted for ten (10) years.

Free Standing Kit (FSK) allows single wall furnaces to be surface mounted Eliminates cutting holes in wall - ideal for masonry wall installation. For use with ceilings up to 8Õ6' tall, adds 4-¾" to unit depth. (vent pipe not included). Weight: 16 lbs.

Resettable Blocked Flue Safety Device automatically shuts the unit off in the event of flue blockage or incorrect vent installation.
Fan accessory kit (WFF81) available for installation on top of furnace to increase circulation. Adds only 10 1/2' to height of casing. Fits flush against wall - not recessed. Operates at 50 CFM on 115V.
Optional Night Setback Thermostat (XL110/XL411) provides economic as well as convenient operation.

ROUGH IN

 

Easy installation method reduces installation time to minutes ... only one man needed. New positive fastening tabs hold grille in place ... makes installation a snap!

Specifications

 


Model
#
Type
Control
Type
Gas
BTU / Hr.
Input
Vent
Size
Gas
Inlet
Finished
Dimensions


SINGLE
WALL

 

W251 Bulb Nat. 25,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W255 M. Volt Nat. 25,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W252 Bulb L.P. 25,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W256 M. Volt L.P. 25,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W351 Bulb Nat 35,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W355 M. Volt Nat 35,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W352 Bulb L.P. 35,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W356 M. Volt L.P. 35,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D

DUAL
WALL

 

W501 Bulb Nat. 50,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W505 M. Volt Nat.. 50,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W502 Bulb L.P. 50,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D
W506 M. Volt L.P. 50,000 4" 1/2" 16 1/2"W x 68"H x 6 1/2"D



Shipping
Weight
Rear Register Kit Fan Kit
Model Weight Model Weight

SINGLE
WALL

 

90 lbs. 40542 5 lbs. WFF81 10 lbs.
90 lbs. 40542 5 lbs. WFF81 10 lbs.
90 lbs. 40542 5 lbs. WFF81 10 lbs.
90 lbs. 40542 5 lbs. WFF81 10 lbs.
90 lbs. 40542 5 lbs. WFF81 10 lbs.
90 lbs. 40542 5 lbs. WFF81 10 lbs.
90 lbs. 40542 5 lbs. WFF81 10 lbs.
90 lbs. 40542 5 lbs. WFF81 10 lbs.

DUAL
WALL

 

134 lbs. N/A N/A WFF81 10 lbs.
134 lbs. N/A N/A WFF81 10 lbs.
134 lbs. N/A N/A WFF81 10 lbs.
134 lbs. N/A N/A WFF81 10 lbs.

One or two fan kits may be used on dual-wall furnace.


Counterflow Wall Furnace

5 MODELS TO CHOOSE FROM
35,000 TO 65,000 BTU

Cozy offers the answer to your remodeling or new construction heating needs, with the Counterflow Wall Furnace series. COZY Counterflows combine contemporary styling and forced air efficiency. A powerful thermostatically controlled blower pulls cold air into the upper grill and delivers warm air at floor level where it's needed most. Counterflow action provides uniform room temperatures and economic operation. Optional side or rear outlet kits are available to further disperse heat into adjacent rooms. COZY Counterflows feature an attractive neutral bone, baked enamel finish, and casing of textured steel that enhances any room setting. Counterflow wall furnaces vent straight up and can be mounted on inside or outside wall.

COZY VALUE FEATURES

  • Eliminates costly ductwork
  • Wall Thermostat - standard equipment
  • Units available with standing pilot or intermittent ignition device
  • Surface or Recess (to 9 1/4') Mount
  • Built-in safety pilot and pressure regulator
  • Resettable blocked flue safety device standard equipment
  • All wiring pigtailed to casing top - facilitates installation
  • Optional vent enclosure kit available for surface mount application
  • Optional side/rear outlet kits available for multi-room air dispersal
  • Combustion Chamber warranted for ten (10) years - no pro rata
  • Optional cabinet trim kit available to trim out recess application

Performance Proven Features
Contemporary Styling plus Forced Air Efficiency


1. Wiring pigtail provided at top of unit casing facilitate installation.

2. Powerful, thermostatically controlled fan , moves cold air into top of unit casing and distributes heated air through lower grill. Easily removable for servicing.

3. Heavy duty continuous seam-welded aluminized combustion chamber. Maximizes heat transfer and prevents rustout. Warranted for 10 years.

4. Auxiliary limit interrupts burn cycle if air is restricted.

5. Control Options: Standing, Low-Btu Pilot; or, even more economic intermittent, ignition device.

6. Multi-port stainless steel burner provides excellent flame characteristics with quiet ignition and extinction.

7. Resettable blocked flue safety device is standard on all models and automatically shuts off in the event of flue blockage or improper vent installations.



The COZY Counterflow offers versatility and economical operation to satisfy virtually all your home heating needs! Versatile, in that it can be recessed into a wall, occupying very little room space; and economical due to counterflow heat action - cold air is drawn in through the top of the unit and warm air is distributed at floor level where itÕs needed most. Optional register kits are available to transfer additional heat into as many as three rooms. A vent enclosure package is available to conceal the 4Ò oval B/W vent pipe in surface-mount applications. An optional cabinet trim kit is available to trim out recess applications. The unit is attractively finished with a neutral bone color cabinet of textured steel.

The COZY Counterflow is you best cold weather friend!


Specifications

 

Model
Number
Type
Control
Type
Gas
BTU/HR.
Input
Vent Size
(Oval)
Gas
Inlet
Finished
Dimensions
Amps Blower
Speed
CFM Approx.
Shipping
Weight
CF353 24 Volt Nat. 35,000 4" 1/2" 14-5/16" W x 10-1/4" D x 78-5/8" H 1.95 1 320 95 lbs.
CF354 24 Volt L.P. 35,000 4" 1/2" 14-5/16" W x 10-1/4" D x 78-5/8" H 1.95 1 320 95 lbs.
CF503 24 Volt Nat. 50,000 4" 1/2" 14-5/16" W x 10-1/4" D x 81-5/16" H 2.25 2 340 107 lbs.
CF504 24 Volt L.P. 50,000 4" 1/2" 14-5/16" W x 10-1/4" D x 81-5/16" H 2.25 2 340 107 lbs.
CF653 24 Volt Nat. 65,000 4" 1/2" 14-5/16" W x 10-1/4" D x 87-5/16" H 2.25 2 440 116 lbs.
CF654 24 Volt L.P. 65,000 4" 1/2" 14-5/16" W x 10-1/4" D x 87-5/16" H 2.25 2 440 116 lbs.
Models With Intermittent Ignition
CF357 24 Volt Nat. 35,000 4" 1/2" 14-5/16" W x 10-1/4" D x 78-5/8" H 2.25 1 320 96 lbs.
CF358 24 Volt L.P. 35,000 4" 1/2" 14-5/16" W x 10-1/4" D x 78-5/8" H 2.25 1 320 96 lbs.
CF557 24 Volt Nat. 55,000 4" 1/2" 14-5/16" W x 10-1/4" D x 87-5/16" H 2.50 2 440 116 lbs.
CF558 24 Volt L.P. 55,000 4" 1/2" 14-5/16" W x 10-1/4" D x 87-5/16" H 2.55 2 440 116 lbs.